Backhoe Loader: Tips on How to Realize Fuel-efficiency
 
Below are 6 ways to save oil during backhoe loader working:

 

1. Decrease or avoid idle running time of your backhoe loader:
Even though it is working without load, there is still oil consuming in the hydraulic pump. When it is under loading or digging operation, don’t let it being idle waiting when backhoe loader is started.

2. Avoid heavy duty:
If the sandy soil or stones that will be loaded are over the standard, it will be harmful to the backhoe loader.

3. Lower the engine rotating speed:
It is sensible to place the throttle rod of accelerator into an economic gear, so that the fuel consumption will be reduced by a large margin.

4. Reduce circling angle:
If you are uploading materials to a self-charging truck, to reduce circling angle can reduce the working period and improve fuel-consuming efficiency.

5. Decrease the engine speed during working:
It is also a most effective way to improve the efficiency.

6. High-order position digging:
If it adopts high-order position digging, backhoe loader should be put on the same height or higher than the working platform.


Email: zzhz114@gmail.com        Tel: 0086-371-68000000