CD1 electric hoist installed on many kinds of cranes of suspending from T-steel and joist steel can lift heavy objects straight or in a curve. The stationary ones installed on fixed trestle can lift objects vertically or from different angles.
The products are widely used at industrial ore enterprises, railway, harbors, warehouses and materials sites etc. they are indispensable machinery to improve working conditions and efficiency in manufacturing.
The electric hoist applies to such an environment as no fire, no explosive danger, no corrosive media and no dirt exist. And the temperature is between 20 Celsius degree below zero and 40 Celsius degree up zero, the wetness is no higher than 85%, the elevation is below 4000m. it is banned to lift melted metals, poisonous, combustible and explosive objects. The applicable power source is 3-phase alternating current, 50 Hz (60 HZ) frequency and 380v-660v voltage. Their rated load must be reduced by 20% accordingly as their working grade increases by one grade compared to their middle-level working grade.