(1) After researching and analyzing current highway bridge construction machine at home and abroad, combining with our successful experience, we develop and produce the new walking type bridge girder launcher according to practical situation. The main features are following:
1. First-made honeycomb girder in China with light self weight, heavy load and strong wind resistance etc.
2. The launching crane conforms to the features of construction of present bridge which form is novel and structure is reasonable.
3. the main girder and main connecting structures adopt the mature pin connecting mechanism, it is very firm and reliable, and the assembly and disassembly are rapid and convenient. 
4. It doesn’t need to pave the longitudinal rails. It not only can reduce the stress of bridge, but also can save the cost of construction. It has a wide adaptability for the box girder.
5. In order to make the bridge girder launcher can adapt the longitudinal slope and transverse slope, the machine adopts legs which can move forward by it. And the force which the bridge bears should be reasonable and safe;
6. Front and middle legs can be adjusted randomly and core plate with adjustable angle which can adapt the erection of curved bridge and Slope Bridge. According to angle of Slope Bridge, the user can adjust the front and middle legs when Slope Bridge is erected. Therefore, it can be used for  45°and less than  45° any angle slope bridge
7. Transverse trolley is added to the lifting trolley, the whole machine traverses with boundary beam which resolve the problem of installation of boundary beam.
      
(2) The design stand of product::        
We design the bridge girder launcher according to the rules of the newest machinery and crane in China, the rules are following: 
1.《Road Bridge Reinforced Concrete and Prestressed Concrete Structure Design Codes》   TB1002.3       
2.《Crane Design Standard》            GB3811       
3.《Crane Test Standards and Procedures》    GB5905       
4.  《Hoisting Machinery Safety Codes》     GB6067      
5.《Design Code for Steel Structure》GB50017        
6.Safety Technology Specification for Special Equipment  TSG Q7002、Q0002        
7. 《Code for design of steel structures》GB50205     
8.《Code for construction and acceptance of steel structure》GB50221        
9.《Weld Outer Dimensions for Steel Construction》GB10854        
10.《Code for construction and acceptance of electric equipment installation engineering》                    GB232    
11.《General technical requirements of assembly》JB/ZQ400.9  
12.《Mechanical properties of fasteners》GB3098