Safety slide contact wire features safe, reliable and perfect mechanical electrical performance, quite convenient for installation and maintenance.

Check the gantry crane safety slide contact wire before installing it, coat antirust paint for non-friction conductive surface, 15-20mm expansion joint shall be kept at joints of two slide contact wires and connect them with soft wire, adjust conductive sliding block to be in good contact with slide contact wire according to actual position of slide contact wire.

Closed slide wire installation shall be in accordance with actual sliding contact device in the worksite to ensure their tight and good contact. Install support frame and accessories to the dimension of sliding contact device firstly, and then install safety slide contact wire by following related stipulations in GBJ232.