Hoisting Machinery: How to Use and Maintain in Run-in Period
 

1. As we all know, hoist machinery belong to special type equipments, so the operators should qualified with as following:
a. Work with the equipment after trained and guided
b. Full understand of the structure and working features
c. Obtain enough experiences about operation and safeguard

2. An introduction provided by manufacture is the necessary information for every operator. Read the introduction in advance and operate according to the introduction is considerable.

3. Notice the working load, not to exceed the 80% rated figures. Arrange compatible workload to avoid superheating due to long time work.

4. Observe the oil/water lever and quality of lubrication, hydraulic oil, cooling liquid, braking fluid and fuel oil. Watch out sealing ability of the entire equipment. If you find it is in short of too much oil or water, please analyze the reasons. In addition, the operators should intensity the lubrication of each oil site and add enough oil lubrication during the run-in time expect for special requirements.

5. It is necessary to keep the equipment clean and adjust and fasten the loosen components in time in case of abrasion or losing.

6. After the run-in time finished, the hoist machinery should be kept a thorough maintenance and pay attention to change the oil or other liquid.

All in all, as long as you keep the hoists in good repair during run-in time, incipient failure will be avoided, service life can be enlarged, working efficiency can be improved and the hoist will bring more earnings for you. The upkeep measures for a hoist machine during run-in period can be summarized as following:
a. The operators should be trained at regular intervals.
b. Lighten the load.
c. Notice the inspection.
d. Lubrication in time.

See more, please visit our website: zzhz.com
Email: zzhz114@gmail.com    Tel: 0086-371-68000000