What’re the safety rules of segmental assembly bridge girder launcher?
Follow the safety precautions stipulated by safety guard on the site
Follow all related instructions and explanation in the installation, use and maintenance manual, check whether all parts work well
As for other matters about use and maintenance not included in the manual, the qualified personnel receiving training from manufacturers should conduct them.
Follow the safety precautions on the equipment or in the cabin. Safety warnings on the equipment or in the working area must be clean enough to identify.
Ensure that segmental assembly bridge girder launcher’s operation in the site is in accordance with technical features of the equipment
Often check whether brake system and hydraulic system work well
Check whether steel wire rope and brake disc have a good contact and a normal function
Ensure that the hanging bracket does not be damaged and that safety device works normally
Check whether the sling is in a good condition, ensure the phenomena such as fracture, crack, without lubrication do not happen
Ensure lifting point or load-bearing action line is in load vertical plane before lifting
Ensure the lifting sub with load is correct and balanced, lift the objects slowly to tension the steel wire rope
If lifting objects can not be realized, note the function of limit load device and check whether lifting objects are blocked by obstacles
Ensure there are no obstacles in the process of lifting and rotation
Send warnings to workers in the site as beginning working
Operate the equipment beyond the scope of lifting loads
As conducting a multistep operation, operating order change too fast should be avoided
Workers in the site must wear protective gear according to safety regulation
Report equipment problems to person in charge anytime (abnormal working, larger noise and others)
